+86-752-3635620

Hotline
Continuous shot blasting cleaning line solution for the surface of automobile body structural parts
Continuous shot blasting cleaning line solution for the surface of automobile body structural parts
Automobile Body Structure Introduction

The car body structure mainly includes: body shell, door, window, front and rear trim, interior and exterior trim and body accessories, seat and ventilation, heating, air conditioning, air conditioning and so on. Cars and other equipment are also included on trucks and special vehicles. The body shell is the basis for the installation of all body parts, usually referred to as the rigid bearing structure of the main bearing elements such as the longitudinals, beams and struts and the elements connected to them. Most of the bus body has an obvious skeleton, while the car body and the truck cab have no obvious skeleton. The body shell usually also includes materials and coatings for sound insulation, heat insulation, vibration, corrosion, sealing, etc. laid thereon. The door is mounted on the body shell by a hinge, and its structure is relatively complicated, which is an important component for ensuring the performance of the vehicle body. These tantalum parts form a space for components such as engines and wheels.

Mayflay Solutions

1.Mayflay can provide stamping lines for parts of body structural parts.

2.Mayflay can provide surface cleaning and spray production lines for body structural parts.



Continuous shot blasting line solution for automotive body structural parts----From Mayflay professional team




一、Shot blasting solutions from Mayflay



1Catenary pass type shot blasting machine

1. Model::MCT-1027P11-16((Select model according to product size).

2.Applicable maximum part size: length: 2800mm, width: 400mm, height: 1000mm

3. Applicable maximum part weight: 2T.

4. Blast wheel QTY:16 PCS.

5. Blast wheel power:11Kw/pcs.

6. Blast wheel motor:ABB.

7. Semi-automatic flow control valve: 16 sets.

8.Operation mode: fully automatic.

9.Shot blasting room entrance size: width: 1000mm, height: 2800mm.

10. Delivery method: The chain automatically transmits.

11.PLC:Siemens.

12.Touch screen: Siemens.

2Hanger type shot blasting machine

1. Model:MHB2-1717P11-3 (Select model according to product size).

2. Applicable maximum part size Dia:1700mm,Height:1700mm。

3. Applicable maximum part weight: 2T.

4. Blast wheel QTY:3 pcs.

5. Blast wheel power:11Kw/pcs.

6. Blast wheel motor:ABB.

7. Semi-automatic flow control valve:3 sets.

8.Operation mode: fully automatic.

9.Delivery method: Double track with double racks.

10. Automatic double door opening.

11.PLC:Siemens.

12.Touch screen: Siemens.

3Wire mesh through type shot blasting machine

1. Model:MND-1030P11-4 (Select model according to product size).

2. Applicable maximum part size:width:1000mm,height:300mm。

3. Applicable maximum part weight: 1T.

4. Blast wheel QTY:4pcs.

5. Blast wheel power:11Kw/pcs.

6. Blast wheel motor:ABB.

7. Semi-automatic flow control valve:4sets.

8.Operation mode: fully automatic.

9.Delivery method:Mesh belt conveyor

10. Shot blasting room entrance:width:1062mm,height:300mm。

11.PLC:Siemens.

12.Touch screen: Siemens.



二、Stamping production line from Mayflay



1Automatic stamping production line

一. Detailed informtaion from customer side

2. Product drawings.

3. Product material.

4. Product schedule requirements.

5. Production requirements.

二.The entire automatic stamping production line contains the following equipment

1. Uncoiler.

2.Leveling machine.

3.Feeder.

4.Punch + mold.

5.ome auxiliary equipment.

6.Other equipment required by the customer.





三、What products can Mayflay offer?



1Auto parts 1

一. Detailed informtaion from customer side

1. Single piece length (both maximum and minimum lengths are required).

2. Single piece width (both maximum and minimum width are required).

3. Part thickness.

4. Single piece weight (both maximum and minimum weight are required).

5. Part material.

6. he processing of the parts before shot blasting.

7.Requirements for surface cleanliness and roughness of parts.

8.Production requirements (daily production / monthly production / annual output).

9. Requirements for the dust collector

10.Provision of the height and space dimensions of the plant of the equipment.

11.Other requirements of customer side.

2Auto parts 2

一. Detailed informtaion from customer side

1. Single piece length (both maximum and minimum lengths are required).

2. Single piece width (both maximum and minimum width are required).

3. Part thickness.

4. Single piece weight (both maximum and minimum weight are required).

5. Part material.

6. he processing of the parts before shot blasting.

7.Requirements for surface cleanliness and roughness of parts.

8.Production requirements (daily production / monthly production / annual output).

9. Requirements for the dust collector

10.Provision of the height and space dimensions of the plant of the equipment.

11.Other requirements of customer side.

3Auto body parts

一. Detailed informtaion from customer side

1. Single piece length (both maximum and minimum lengths are required).

2. Single piece width (both maximum and minimum width are required).

3. Part thickness.

4. Single piece weight (both maximum and minimum weight are required).

5. Part material.

6. he processing of the parts before shot blasting.

7.Requirements for surface cleanliness and roughness of parts.

8.Production requirements (daily production / monthly production / annual output).

9. Requirements for the dust collector

10.Provision of the height and space dimensions of the plant of the equipment.

11.Other requirements of customer side.



Online MessageOnline Message
Contact Mailbox Contact Mailbox