+86-752-3635620

Hotline
Shot Blasting Cleaning Line Solution For Automotive Transmission System Components Surface
Shot Blasting Cleaning Line Solution For Automotive Transmission System Components Surface
Automotive Transmission System Introduction

The power transmission device between the automobile engine and the drive wheels is called the drive train of the automobile. It should ensure that the car has the necessary traction and speed in various driving conditions, as well as the function of ensuring the coordination between the traction force and the vehicle speed, so that the car has good power and fuel economy; it should also ensure that the car can reverse, and The left and right drive wheels can accommodate differential speed requirements and enable power transfer to be smoothly combined or completely and quickly separated as needed. The drive train includes the clutch, transmission, drive shaft, final drive, differential and half shaft. The power transmission device between the automobile engine and the drive wheels is called the drive train of the automobile.

Mayflay Solutions


1.Mayflay can provide surface cleaning and spray production lines for automotive transmission system.



Continuous shot blasting line solution for automotive transmission system ----From Mayflay professional team




一、Shot blasting solutions from Mayflay:



1Catenary pass type shot blasting machine

1. Model: MCT-1027P11-16 (Select model according to product size).

2. Applicable maximum part size: length: 2800mm, width: 400mm, height: 1000mm

3. Applicable maximum part weight: 2T.

4. Blast wheel QTY:16 PCS.

5. Blast wheel power:11Kw/pcs.

6. Blast wheel motor:ABB.

7. Semi-automatic flow control valve: 16 sets.

8.Operation mode: fully automatic.

9.Shot blasting room entrance size: width: 1000mm, height: 2800mm.

10. Delivery method: The chain automatically transmits.

11.PLC:Siemens.

12.Touch screen: Siemens.

2Hanger type shot blasting machine

1. Model:MHB2-1717P11-3 (Select model according to product size).

2. Applicable maximum part size Dia:1700mm,Height:1700mm。

3. Applicable maximum part weight: 2T.

4. Blast wheel QTY:3 pcs.

5. Blast wheel power:11Kw/pcs.

6. Blast wheel motor:ABB.

7. Semi-automatic flow control valve:3 sets.

8.Operation mode: fully automatic.

9.Delivery method: Double track with double racks.

10. Automatic double door opening.

11.PLC:Siemens.

12.Touch screen: Siemens.

3Wire mesh through type shot blasting machine

1. Model:MND-1030P11-4 (Select model according to product size).

2. Applicable maximum part size:width:1000mm,height:300mm。

3. Applicable maximum part weight: 1T.

4. Blast wheel QTY:4pcs.

5. Blast wheel power:11Kw/pcs.

6. Blast wheel motor:ABB.

7. Semi-automatic flow control valve:4sets.

8.Operation mode: fully automatic.

9.Delivery method:Mesh belt conveyor

10. Shot blasting room entrance:width:1062mm,height:300mm。

11.PLC:Siemens.

12.Touch screen: Siemens.

4Wet dust collector

1. Model:MWDC-100(Explosion-proof).

2. Equipped with above mentioned shot blasting machine

3. Dust fan power:22Kw.

4. Air volum:≤9000m3/h.

5. Air pressure≤7000Pa/h.

6. Noise≤80db.

7. Tuyere diameter:φ320mm.

8. Dust emission:30mg/m3.

9.Scraper motor:0.37Kw.

10. Pump motor:7.5Kw.

11.PLC:Siemens.

12.Touch screen: Siemens.




二、What products can Mayflay offer?



1Automotive transmission system 1

一. Detailed informtaion from customer side

1. Single piece length (both maximum and minimum lengths are required).

2. Single piece width (both maximum and minimum width are required).

3. Part thickness.

4. Single piece weight (both maximum and minimum weight are required).

5. Part material.

6. he processing of the parts before shot blasting.

7.Requirements for surface cleanliness and roughness of parts.

8.Production requirements (daily production / monthly production / annual output).

9. Requirements for the dust collector

10.Provision of the height and space dimensions of the plant of the equipment.

11.Other requirements of customer side.

2Automotive transmission system 2

一. Detailed informtaion from customer side

1. Single piece length (both maximum and minimum lengths are required).

2. Single piece width (both maximum and minimum width are required).

3. Part thickness.

4. Single piece weight (both maximum and minimum weight are required).

5. Part material.

6. he processing of the parts before shot blasting.

7.Requirements for surface cleanliness and roughness of parts.

8.Production requirements (daily production / monthly production / annual output).

9. Requirements for the dust collector

10.Provision of the height and space dimensions of the plant of the equipment.

11.Other requirements of customer side.

3Automotive transmission system 3

一. Detailed informtaion from customer side

1. Single piece length (both maximum and minimum lengths are required).

2. Single piece width (both maximum and minimum width are required).

3. Part thickness.

4. Single piece weight (both maximum and minimum weight are required).

5. Part material.

6. he processing of the parts before shot blasting.

7.Requirements for surface cleanliness and roughness of parts.

8.Production requirements (daily production / monthly production / annual output).

9. Requirements for the dust collector

10.Provision of the height and space dimensions of the plant of the equipment.

11.Other requirements of customer side.



Online MessageOnline Message
Contact Mailbox Contact Mailbox