Machine Installation: Catenary pass type shot blasting machine is going to finish installation in customer site.
Last time we have reported that Catenary pass type shot blasting machine equipped with wet dust collector is ready to be shipped to our customer site. This time 10 days passed, not only thanks for Maflay professional installation team which with rich experience, but also appreciated of our customer’s full support on the installation spot, now the machine is close to the end of installation work.
The next step is to test and debug the machine, if the machine is uccessfully debugged and will be put into use on the customer side.
Customer site installation picture from our installation team:
Machine technical information:
1. Application: Used for surface cleaning of auto parts etc.
2. Main door opening size: 1000*2000mm (W*H)
3. Maximum workpiece size: 400X1600mm (W*H)
4. Shot blasting machine Size: 14000 × 1800 × 3200 mm (L*W*H)
5. Shot blaster:
Motor power: 15kw
Qty: 12 sets
6. Dust collector: wet dust collector
7. Total power: 383 kw
Mayflay team is always spare every effort to provide professional solution for our custmer, any intersted pls feel free to conuslt.
Thanks for your reading and support.