+86-752-3635620

Hotline
Application case of catenary shot blasting machine MCT-1020Q15-16 in auto parts industry
Application case of catenary shot blasting machine MCT-1020Q15-16 in auto parts industry

Main purchase model

1.Catenary shot blasting machine: MCT-1020Q15-16, QTY:1 SET;

2.Catenary shot blasting machine: MCT-1020Q15-8,QTY:1 SET;


pplication:

It is applied to all kinds of carbon steel, stainless steel, alloy steel, special steel hardware fittings, building materials, vehicle parts, valve fittings, mechanical parts and other precision castings.


The main features of this machine:


1.Adopting continuous chain shot blasting operation, connecting with spraying line to reduce labor cost;


2.Using spiral pusher and elevator system, and a photoelectric sensing device is installed at the bottom to monitor and alarm the pellet recovery system;


3.Using secondary filtration technology, the dust emission reaches 50mg/m3;


4.The dust collector adopts a noise reduction design, noise is less than 85db;


5.It has a wide application range and has been applied to forging/casting, automobile, textile machinery, heat treatment. Surface treatment of sand, rust, scale and burrs on the surface of small and medium-sized castings, forgings, stampings, gears, springs, etc.


6.The machine is with good cleaning effect, compact structure, high degree of automation and easy maintenance;


7.Shot blasting chamber body is made of manganese steel precision welding; Easy to repair and maintenance, greatly improving the maintenance. Machine body ensures 8 years use life.


8.Adopting Mayflay precision casting high performance shot blaster which is equipped with semi-automatic flow control valve to adjust the shot flow.


9.The shot blasting chamber is compact and sealed. The inlet and outlet are made of multi-layer rubber + brush and compact and sealed. It is quick to install and replace with plug-in type. The baffle on the inner side of the throwing head is fixed by the wear-resistant nut with high wear-resistant manganese steel plate, which can prevent the steel shot throwing out and leak out, and can also prevent damage to the sealing device and ensure the phenomenon of no material splashing;


10.Dust collecting system uses wet Venturi dust collector,fire safety, without any spare parts, use cost low, dust emissions is less than 50 mg/m3.


11.Electrical system adopts Siemens system, and human-machine interface usies 10 inches color touch control panel, 3D animation guidance prompt, powerful function.


12.All necessary labels on the machine are posted at distinct positions, such as safety tips, maintenance tips, operation standard, equipment status, customer service engineer card and service record sheet, etc.


13.All motors of the machine are driven by direct transmission, and the safety and maintenance performance are greatly improved.


14.All maintenance and repair doors have safety detection devices. When an emergency occurs, the safety monitoring device is pressed immediately, and all failure alarms are displayed on the touch screen;


15.The mechanical and electrical components of the entire equipment are designed and manufactured according to the European standard CE standard. Each mechanism and electrical parts are related to each other to ensure the safety and stability of the equipment.



Technology Data:


1.Catenary pass type shot blasting machine MCT-1020Q15-16 main technology data

Shot Blasting Room Entrance Size: W*H 1000*2000mm

Part size:W*H 400*1600mm

Part max. weight:1000kg


Configuration contains

1 set shot blasting room,6 sets spiral pusher system,

2 sets of elevator system, 1 set of wind sorting system, 2 sets of maintenance platform, 16 sets of semi-automatic flow valves, 16 sets of casting type blasting machine system

2 sets grating sensing systems, 1 set wet dust collector system, 1 set electrical system


2.Catenary pass type shot blasting machine MCT-1020Q15-8main technology data

Shot Blasting Room Entrance Size: W*H 1000*2000mm

Part size:W*H 400*1600mm

Part max. weight:1000kg


Configuration contains

1 set shot blasting room,3 sets spiral pusher system,

1 set elevator system, 1 set wind sorting system, 1 set maintenance platform, 8 sets of semi-automatic flow valves, 8 sets of casting type blasting machine system

2 sets grating sensing systems, 1 set wet dust collector system, 1 set electrical system


MCT-1020Q15-8 Car body parts drawing processed by catenary shot blasting machine


Online MessageOnline Message
Contact Mailbox Contact Mailbox